Gas Surface Interactions Lab

Publications

Publications in Refereed Journals

  1. Davuluri, R. S. C., Fu, R., Tagavi, K. A., and Martin, A., "Fully Coupled Material Response and Internal Radiative Heat Transfer for Three-Dimensional Heat Shield Modeling",  Journal of Themrophysics and Heat Transfer, Vol. 38, No. 1 (2024), pp. 20-35.
    doi: 10.2514/1.T6699
  2. Zibitsker, A. L., McQuaid, J. A., Brehm, C., and Martin, A., "Validation and analysis of a coupled fluid-ablation framework for modeling low-temperature ablator",  International Journal of Heat and Mass Transfer, Vol. 218, 2024.
    doi: 10.1016/j.ijheatmasstransfer.2023.124728
  3. Stoffel, T. D., Barrios-Lobelle, A., Schmidt, J. D., Martin, A., and Poovathingal, S. J., "Computational Fluid Dynamics Analysis of the Kentucky Re-Entry Universal Payload System", Journal of Spacecraft and Rockets, 2023.
    doi: 10.2514/1.A35548
  4. Davuluri, R. S. C., Zhang, H., Taghavi, K. A. and Martin, A., "Effects of spalled particles thermal degradation on a hypersonic flow field environment", International Journal of Multiphase Flow, Vol 159, 2023.
    doi: 10.1016/j.ijmultiphaseflow.2022.104287
  5. Cooper, J. M., and Martin, A., "Novel Engineering Methodology for Decoupled Aerothermal Analysis of Hypersonic Atmospheric Entry Flows",  Journal of Spacecraft and Rockets, Vol. 60, 2023.
    doi: 10.2514/1.A35433
  6. Cooper, J. M., Salazar, G., and Martin, A., "Numerical Investigation of Film Coefficient Approximation for Chemically Reacting Boundary-Layer Flows",  Journal of Thermophysics and Heat Transfer, 2023.
    doi: 10.2514/1.T6707
  7. Ruffner, M. P., Schmidt, J. D., Rowe, I. S., Nolin, R. D., Smith, W., and Martin, A., "Electronics Design and Testing of the KREPE Atmospheric Entry Capsule Avionics", IEEE Journal on Miniaturization for Air and Space Systems, 2023.
    doi: 10.1109/JMASS.2023.3303042
  8. Tacchi, B., Stoffel, T. D., Martin, A., and Poovathingal, S. J., "Reconstruction of the Kentucky Re-Entry Universal Payload System Hypersonic Flight Trajectory", Journal of Spacecraft and Rockets, 2023.
    doi: 10.2514/1.A35826
  9. ibitsker, A. L., McQuaid, J. A., Stern, E. C., Palmer, G. E., Libben, B. J., Brehm, C., and Martin, A., "Finite-rate and equilibrium study of graphite ablation under arc-jet conditions",  Computers & Fluids, Vol. 267, 2023.
    doi: 10.1016/j.compfluid.2023.106069
  10. Price, K. J., Borchetta, C. G., Hardy, J. M., Panerai, F., Bailey, S. C. C., and Martin, A., “Arc-Jet Measurements of Low-Density Ablator Spallation,” Experimental Thermal and Fluid Science, Vol. 133, No. 110544, May 2022.
    doi: 10.1016/j.expthermflusci.2021.110544
  11. Martin, A. and Panesi, M., “Radiative transmission and absorption within the thermal protection system of an atmospheric entry spacecraft,” Journal of Spacecraft and Rockets, 2020.
    doi: 10.2514/1.A35029
  12. Davuluri, R. S. C., Bailey, S. C. C., Tagavi, K. A., and Martin, A., “A drag coefficient model for lagrangian particle dynamics relevant to high-speed flows,” International Journal of Heat and Fluid Flow, vol. 87, 2021, Article 108706.
    doi: 10.1016/j.ijheatfluidflow.2020.108706.
  13. Omidy, A. D., Cooper, J. M., Tagavi, K. A., and Martin, A., “VISTA, an open Avcoat material database for material response modeling,” JANNAF Journal of Propulsion and Energetics, vol. 12, no. 1, 2021.
  14. Ho, M., Leclaire, S., Trépanier, J.-Y., Reggio, M., and Martin, A., “Permeability cal- culation of a fibrous thermal insulator using the lattice boltzmann method,” Journal of Thermophysics and Heat Transfer, 2021.
    doi: 10.2514/1.T6154.
  15. Cochell, T. J., Unocic, R. R., Grana-Otero, J., and Martin, A., “Nanoscale oxidation behavior of carbon fibers revealed with in situ gas cell stem,” Scripta Materialia, vol. 199, 2020, Article 113820.
    doi: 10.1016/j.scriptamat.2021.113820.
  16. Duzel, U., Schroeder, O. M., Zhang, H., and Martin, A., “Numerical simulation of an arc jet test section,” Journal of Thermophysics and Heat Transfer, vol. 34, no. 2, pp. 393–403, 2020.
    doi: 10.2514/1.T5722.
  17. Fu, R., Weng, H., Wenk, J. F., and Martin, A., “Thermal expansion for charring ablative materials,” Journal of Thermophysics and Heat Transfer, vol. 34, no. 1, pp. 57– 65, 2020.
    doi: 10.2514/1.T5718.
  18. Weng, H., Duzel, U., Fu, R., and Martin, A., “Geometric effects on charring ablator: modeling of the full-scale stardust heat shield,” Journal of Spacecraft and Rockets, vol. 58, no. 2, pp. 302–315, 2020.
    doi: 10.2514/1.A34828.
  19. Panerai, F., Cochell, T. J., Martin, A., and White, J. D., “Experimental measurements of the high-temperature oxidation of carbon fibers,” International Journal of Heat and Mass Transfer, vol. 136, pp. 972–986, 2019.
    doi: 10.1016/j.ijheatmasstransfer.2019.03.018.
  20. Rostkowski, P., Venturi, S., Omidy, A. D., Weng, H., Martin, A., and Panesi, M., “Calibration and uncertainty quantification of vista ablator material database using bayesian inference,” Journal of Thermophysics and Heat Transfer, vol. 33, no. 2, pp. 356– 369, 2019.
    doi: 10.2514/1.T5396.
  21. Zhang, H., Martin, A., and Wang, G., “Numerical analysis of time accuracy of a primitive variable-based formulation of the conservative form of the governing equations for compressible flows,” International Journal of Computational Fluid Dynamics, vol. 33, no. 1-2, pp. 1–9, 2019.
    doi: 10.1080/10618562.2018.1549730.
  22. Bailey, S. C. C., Bauer, D., Panerai, F., Splinter, S. C., Danehy, P. M., Hardy, J. M., and Martin, A., “Experimental analysis of spallation particle trajectories in an arc-jet environment,” Experimental Thermal and Fluid Science, vol. 93, pp. 319–325, 2018.
    doi: 10.1016/j.expthermflusci.2018.01.005
  23. Borchetta, C. G., Martin, A., and Bailey, S. C. C., “Examination of the effect of blowing on the near-surface flow structure over a dimpled surface,” Experiments in Fluids, vol. 59, no. 3, Article 36, 2017.
    doi: 10.1007/s00348-018-2498-z
  24. Li, Z., Bailey, S. C. C., Hoagg, J. B., and Martin, A., “A retrospective cost adaptive Reynolds-averaged Navier-Stokes k-w model for data-driven unsteady turbulent simulation,” Journal of Computational Physics, vol. 357C, pp. 353–374, 2018.
    doi: 10.1016/j.jcp.2017.11.037
  25. Fu, R., Weng, H., Wenk, J. F., and Martin, A., “Thermo-mechanical coupling for charring ablators,” Journal of Thermophysics and Heat Transfer, 2017.
    doi: 10.2514/1.T5194
  26. Martin, A., Zhang, H., and Tagavi, K. A., “An introduction to a systematic derivation of surface balance equations without the excruciating pain,” International Journal of Heat and Mass Transfer, vol. 115, Part A, pp. 992–999, 2017.
    doi: 10.1016/j.ijheatmasstransfer.2017.07.078
  27. Li, Z., Zhang, H., Bailey, S. C., Hoagg, J. B., and Martin, A., “A Data-Driven RANS k-ω approach for modeling turbulent flows,” Journal of Computational Physics, vol. 345, 2017, pp. 111–131.
    doi: 10.1016/j.jcp.2017.05.009
  28. Panerai, F., Ferguson, J. C., Lachaud, J. R., Martin, A., Gasch, M. J., and Mansour, N. N., “Analysis of rigid and flexible substrates for lightweight ablators based on x-ray micro-tomography,” International Journal of Heat and Mass Transfer, vol. 108, Part A, pp. 801–811, 2017.
    doi: 10.1016/j.ijheatmasstransfer.2016.12.048.
  29. Scoggins, J. B., Rabinovich, J., Barros-Fernandez, B., Martin, A., Lachaud, J. R., Jaffe, R. L., Mansour, N. N., Blanquart, G., and Magin, T. E., “Thermodynamic properties of equilibrium carbon-phenolic gas mixtures,” Aerospace Science and Technology, vol. 66, pp. 177–192, 2017.
    doi: 10.1016/j.ast.2017.02.025.
  30. Martin, A. and Martin, T., “A not-so-harmless experiment in predatory Open-Access publishing,” Learned Publishing, vol. 29, no. 4, pp. 301–305, 2016.
    doi: 10.1002/leap.1060
  31. Martin, A., Bailey, S. C. C., Panerai, F., Davuluri, R. S. C., Vazsonyi, A. R., Zhang, H., Lippay, Z. S., Mansour, N. N., Inman, J. A., Bathel, B. F., Splinter, S. C., and Danehy, P. M., “Numerical and experimental analysis of spallation phenomena,” CEAS Space Journal, vol. 8, no. 2, 2016.
    doi: 10.1007/s12567-016-0118-4
  32. Panerai, F., White, J. D., Cochell, T. J., Schroeder, O. M., Mansour, N. N., Wright, M. J., and Martin, A., “Experimental measurements of the permeability of fibrous carbon at high temperature,” International Journal of Heat and Mass Transfer, vol. 100, 2016.
    doi: 10.1016/j.ijheatmasstransfer.2016.05.016
  33. Omidy, A. D., Panerai, F., Lachaud, J. R., Mansour, N. N., and Martin, A., “Effects of water phase change on the material response of low-density carbon phenolic ablators,” Journal of Thermophysics and Heat Transfer, vol. 30, no. 2, pp. 473–478, 2016.
    doi: 10.2514/1.T4814
  34. Nouri, N., Panerai, F., Tagavi, K. A., Mansour, N. N., and Martin, A., “Evaluation of the anisotropic radiative conductivity of a low-density carbon fiber material from realistic microscale imaging,” International Journal of Heat and Mass Transfer, vol. 95, pp. 535–539, 2016.
    doi: 10.1016/j.ijheatmasstransfer.2015.12.004
  35. Ferguson, J. C., Panerai, F., Bailey, S. C. C., Lachaud, J. R., Martin, A., and Mansour, N. N., “Modeling the oxidation of low-density carbon fiber material based on micro-tomography,” Carbon, vol. 96, pp. 57–65, 2016.
    doi: 10.1016/j.carbon.2015.08.113
  36. Davuluri, R. S. C., Zhang, H., and Martin, A., “Numerical study of spallation phenomenon in an arc-jet environment,” Journal of Thermophysics and Heat Transfer, vol. 30, no. 1, pp. 32–41 2015.
    doi: 10.2514/1.T4586
  37. Martin, A. and Boyd, I. D., “Modeling of heat transfer attenuation by ablative gasses during the Stardust re-entry,” Journal of Thermophysics and Heat Transfer, vol. 29, no. 3, pp. 450–466, 2015.
    doi: 10.2514/1.T4202
  38. Martin, A., Boyd, I. D., Cozmuta, I., and Wright, M. J., “Kinetic rates for gas phase chemistry of phenolic based carbon ablator decomposition in atmospheric air,” Journal of Thermophysics and Heat Transfer, vol. 29, no. 2, pp. 222–240, 2015.
    doi: 10.2514/1.T4184
  39. Nouri, N. and Martin, A., “Three-dimensional radiation heat transfer model for carbon fiber preforms,” International Journal of Heat and Mass Transfer, vol. 83, pp. 629–635, 2015.
    doi: 10.1016/j.ijheatmasstransfer.2014.12.041
  40. Weng, H., Bailey, S. C. C., and Martin, A., “Numerical study of iso-q sample geometric effects on charring ablative materials,” International Journal of Heat and Mass Transfer, vol. 80, pp. 439–465, 2015.
    doi: 10.1016/j.ijheatmasstransfer.2014.09.040
  41. Weng, H. and Martin, A., “Numerical investigation of thermal response using orthotropic charring ablative material,” Journal of Thermophysics and Heat Transfer, vol. 29, no. 3, pp. 429–438, 2015.
    doi: 10.2514/1.T4576
  42. Weng, H. and Martin, A., “Multi-dimensional modeling of pyrolysis gas transport inside charring ablative materials,” Journal of Thermophysics and Heat Transfer, Vol. 28, No. 4, pp. 583-597, 2014.
    doi: 10.2514/1.T4434
  43. Martin, A. and Boyd, I. D., “Strongly coupled computation of material response and nonequilibrium flow for hypersonic ablation,” Journal of Spacecraft and Rockets, 2014, Vol. 50, No. 4, pp. 583-597, 2014.
    doi: 10.2514/1.A32847
  44. Alkandry, H., Boyd, I. D., and Martin, A., “Comparison of Models for Mixture Transport Properties for Flow Field Simulations of Ablative Heat-Shields,” Journal of Thermophysics and Heat Transfer, Vol. 28, No. 4, pp. 569-582, 2014.
    doi: 10.2514/1.T4233
  45. Panerai, F., Martin, A., Mansour, N. N., Sepka, S. A., and Lachaud, J., “Flow-tube Oxidation Experiments on the Carbon Preform of PICA,” Journal of Thermophysics and Heat Transfer, Vol. 27, No. 2, pp. 181–190, 2014.
    doi: 10.2514/1.T4265
  46. Miller, M. A., Martin, A., and Bailey, S. C. C., “Investigation of the scaling of roughness and blowing effects on turbulent channel flow.” Experiments in Fluids, Vol. 55, No. 1675, 2014.
    doi:10.1007/s00348-014-1675-y
  47. Farbar, E. D., Boyd, I. D., and Martin, A., “Numerical Prediction of Hypersonic Flow Fields Including Effects of Electron Translational Nonequilibrium,” Journal of Thermophysics and Heat Transfer, Vol. 27, No. 4, 2013, pp. 593–606.
    doi: 10.2514/1.T3963
  48. Boyd, I. D., Martin, A., Wiebenga, J. E., and Jenniskens, P., “Hypersonic Flow and Radiation Analysis of the Automated Transfer Vehicle “Jules Verne,” Journal of Spacecraft and Rockets, Vol. 50, No. 1, 2013, pp. 124–136.
    doi: 10.2514/1.A32208
  49. Martin, A., Scalabrin, L. C., and Boyd, I. D., “High-performance modeling of an atmospheric re-entry vehicle,” Journal of Physics: Conference Series, Vol. 341, 2012, Article 012002.
    doi: 10.1088/1742-6596/341/1/012002
  50. Martin, A. and Boyd, I. D., “Non-Darcian behavior of pyrolysis gas in a thermal protection system,” Journal of Thermophysics and Heat Transfer, Vol. 24, No. 1, 2010, pp. 60–68.
    doi: 10.2514/1.44103
  51. Martin, A. and Boyd, I. D., “Variant of the Thomas algorithm for opposed-border tridiagonal systems of linear equations,” International Journal for Numerical Methods in Biomedical Engineering, Vol. 26, No. 6, 2008, pp. 752–759.
    doi: 10.1002/cnm.1172
  52. Martin, A., Reggio, M., and Trépanier, J.-Y., “Numerical solution of axisymmetric multi-species compressible gas flow: Towards improved circuit breaker simulation,” International Journal of Computational Fluid Dynamics, Vol. 22, No. 4, 2008, pp. 259–271.
    doi: 10.1080/10618560701868503
  53. Martin, A., Reggio, M., Trépanier, J.-Y., and Guo, X., “Transient ablation regime in circuit breakers,” Plasma Science and Technology, Vol. 9, No. 6, 2007, pp. 653– 656.
    doi: 10.1088/1009-0630/9/6/02
  54. Maruzewski, P., Martin, A., Reggio, M., and Trépanier, J.-Y., “Simulation of arc-electrode interaction using sheath modeling in SF6 circuit-breakers,” Journal of Physics D: Applied Physics, Vol. 35, No. 9, 2002, pp. 891–899.
    doi: 10.1088/0022-3727/35/9/309

Publications in Refereed Conference Proceedings

  1. Baeg S., Davuluri R., Martin A., "Development of two-temperature model in unified solver", AIAA SciTech 2024 Forum, AIAA 2024-0445, Jan. 2024.
    doi: 10.2514/6.2024-0445
  2. Sinha S., Fu R., Bailey S., Hoagg J. B., Martin A., "Utilizing a retrospective cost adaptation control (RCAC) algorithm to achieve data-driven, adaptive, real-time (DART) precision meteorological forecasts", AIAA SciTech 2024 Forum, AIAA 2024-1082, Jan. 2024.
    doi: 10.2514/6.2024-1082
  3. Zibitsker A. L., McQuaid J. A., Fu R., Brehm C., Martin A., "Simulation of porous carbon preform ablation in a chemically reacting environment", AIAA SciTech 2024 Forum, AIAA 2024-1479, Jan. 2024.
    doi: 10.2514/6.2024-1479
  4. Price K. J., Bailey S., Martin A., "Analysis of arc-jet sample spallation products", AIAA SciTech 2024 Forum, AIAA 2024-1480, Jan. 2024.
    doi: 10.2514/6.2024-1480
  5. Barrios-Lobelle A., Haas F.M., Poovathingal S.J., Martin A., "Characterization of hypersonic flow over slender bodies at sea-level", AIAA SciTech 2024 Forum, AIAA 2024-1688, Jan. 2024.
    doi: 10.2514/6.2024-1688
  6. Knutson A., Candler G. V., Zibitsker A. L., Joseph B., Hannemann J., Martin A., "Coupled Simulation of Material Response using Equilibrium and Finite-Rate Ablation Models", AIAA SciTech 2024 Forum, AIAA 2024-0378, Jan. 2024.
    doi: 10.2514/6.2024-0378
  7. Fu, R., Gur, H. B., Zibitsker, A. L., and Martin, A., "A Multi-Species High-Fidelity Material Response Framework for Ablation Physics", AIAA Aviation Forum, AIAA Paper 2023-3328, Jun. 2023.
    doi: 10.2514/6.2023-3328
  8.  Zibitsker, A. L., McQuaid, J. A., Brehm, C., and Martin, A., "Deviation from Equilibrium Thermochemistry and Aerodynamic Heating Assumptions in the Ablation Process of Camphor", AIAA Aviation Forum, AIAA Paper 2023-3486, Jun. 2023.
    doi: 10.2514/6.2023-3486
  9.  Tacchi, B. D., Martin, A., and Poovathingal, S. J., "Inverse estimation of the Kentucky Re-entry Universal Payload System (KRUPS) flight trajectory", AIAA Aviation Forum, AIAA Paper 2023-3733, Jun. 2023.
    doi: 10.2514/6.2023-3733
  10. Gur, H., B., Fu, R., and Martin, A., "Material Response Modelling of Ablating Thin Layers", AIAA Aviation Forum, AIAA Paper 2023-3729, Jan. 2023.
    doi: 10.2514/6.2023-3729
  11. Schmidt, J. D., Ruffner, M. P.,  Nichols, J. T., Rowe, I. S., Nolin, R. D., Ford, K. F., Smith, W. T., and Martin, A., "Kentucky Re-entry Universal Payload System (KRUPS): Overview of hypersonic re-entry flight", AIAA SciTech Forum, AIAA Paper 2023-0206, Jan. 2023.
    doi: 10.2514/6.2023-0206
  12. Dungan, D., D., McQuaid, J., A., Zibitsker, A. L., Martin, A, and Brehm, C., "Numerical Investigation of Fluid-Ablation Interactions for a Mach 5.3 Transitional Boundary Layer Flow Over a 13 Degree Cone", AIAA SciTech Forum, AIAA Paper 2023-0476, Jan. 2023.
    doi: 10.2514/6.2023-0476
  13. Bessire, B. K., Martin, A., Renfro, M. W.,  Bailey, S., Price, K. J., Panerai, F., and Chen, S., "An Overview of Experiments in The Entry Systems Modeling Project", AIAA SciTech Forum, AIAA Paper 2023-1337, Jan. 2023.
    doi: 10.2514/6.2023-1337
  14. McQuaid, J. A., Zibitsker, A. L., Martin, A, and Brehm, C., "Heat Flux Predictions using a 3D Near Body Solver on an Adaptive Block-Structured Cartesian Off-Body Grid", AIAA SciTech Forum, AIAA Paper 2023-1799, Jan. 2023.
    doi: 10.2514/6.2023-1799
  15. Davuluri, R. S. C.,  Price, K. J.,  Bailey, S., Tagavi, K., and Martin, A., "Numerical reconstruction of spalled particle trajectories in an arc-jet environment: Cylinder and Hemicylinder samples", AIAA SciTech Forum, AIAA Paper 2023-1911, Jan. 2023.
    doi: 10.2514/6.2023-1911
  16. Price, K., J., Martin, A., and Bailey, S., "Characterization of spalled particles resulting from arc-jet tests", AIAA SciTech Forum, AIAA Paper 2023-1913, Jan. 2023.
    doi: 10.2514/6.2023-1913
  17. Fu, R., and Martin, A., "Crack Modeling in Charring Ablation Materials", AIAA ScTtech Forum, AIAA Paper 2023-2085, Jan. 2023.
    doi: 10.2514/6.2023-2085
  18. Davuluri, R. S. C., Price, K. J.,  Bailey, S., Tagavi, K., and Martin, A., "Numerical reconstruction of spalled particle trajectories in an arc-jet environment: Accounting for non-sphericity and back-tracking", AIAA SciTech Forum, AIAA Paper 2023-2714, Jan. 2023.
    doi: 10.2514/6.2023-2714
  19. Gur, H., B., Fu, R., and Martin, A., "Materials Response Modeling of  Pyrolysis Gases Flow Through Material with Thin Layers", AIAA SciTech Forum, AIAA Paper 2023-3729, Jan. 2023.
    doi: 10.2514/6.2023-3729
  20. Askins, L. P. and Martin, A., “Reconstruction of Arc-Jet Environment Using 2D Material Response Models,” Computational Fluid Dynamics (ICCFD11), Maui, HI, July 2022.
  21. Price, K. J., Bailey, S. C. C., and Martin, A., “Characterization and Modeling of Spallation in Thermal Protection Systems,” Computational Fluid Dynamics (ICCFD11), Maui, HI, July 2022.
  22. Zibitsker, A. L., Martin, A., McQuaid, J. A., Brehm, C., Palmer, G., Libben, B., and Stern, E., “Study of Graphite Ablation at Arc-Jet Conditions using Finite-Rate and Equilibrium Chemistry Models,” 11th International Conference on Computational Fluid Dynamics (ICCFD11), ICCFD11-2022-2602, Maui, HI, July 2022.
  23. Price, K. J., Bailey, S. C. C., and Martin, A., “Characterization and Modeling of Arc-Jet Sample Spallation Particles,” International Conference on Flight vehicles, Aerothermodynamics and Re-entry Missions and Engineering (FAR 2022), Heilbronn, Germany, July 2022.
  24. Schmidt, J. D., Nichols, J. T., Ruffner, M. P., Smith, W. T., and Martin, A., “Overview of the orbital re-entry of the KRUPS capsule,” International Conference on Flight vehicles, Aerothermodynamics and Re-entry Missions and Engineering (FAR 2022), Heilbronn, Germany, July 2022.
  25. Seif, M., Martin, A., and Beck, M. J., “Stochastic mechanical modeling of fibrous ablators: the influence of defects on directional behavior,” International Conference on Flight vehicles, Aerothermodynamics and Re-entry Missions and Engineering (FAR 2022), Heilbronn, Germany, July 2022.
  26. McQuaid, J. A., Zibitsker, A. L., Martin, A., and Brehm, C., “Kentucky Re-Entry Universal Payload System (KRUPS): Overview of flight test via high-altitude balloon,” AIAA Aviation Forum, AIAA Paper 2022-4088, Jun 2022.
    doi: 10.2514/6.2022-4088
  27. Schmidt, J. D., Nichols, J. T., Dietz, C. J., Askins, L. P., Ford, K. F., Perry, A., Smith, W. T., and Martin, A., “Kentucky Re-Entry Universal Payload System (KRUPS): Overview of flight test via high-altitude balloon,” AIAA Aviation Forum, AIAA Paper 2022-3729, Jun 2022.
    doi: 10.2514/6.2022-3729
  28. Askins, L. P., Martin, A., Libben, B., Palmer, G., and Williams, J. T., “Semi-Empirical 1D Material Response Modeling Using Inverse Methods,” AIAA Aviation Forum, AIAA Paper 2022-3730, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-3730
  29. Fu, R., Sinha, S., Barrow, C. T., Maddox, J. F., Hoagg, J. B., and Martin, A., “A Data-Driven Approach For Real-Time Estimation of Material Uncertainty,” AIAA Aviation Forum, AIAA Paper 2022-3728, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-3728
  30. Khaleel, M. and Martin, A., “Radiative conductivity estimation using direct approach for fibrous materials,” AIAA Aviation Forum, AIAA Paper 2022-3946, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-3946
  31. Price, K. J., Davuluri, R. S. C., Palmer, G., Bailey, S. C. C., and Martin, A., “Modeling of spalled particles for arc-jet test planning,” AIAA Aviation Forum, AIAA Paper 2022-3948, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-3948
  32. Schmitt, S. and Martin, A., “A Kinetic Monte Carlo based analysis of graphite oxidation with realistic defect distributions,” AIAA Aviation Forum, AIAA Paper 2022-3945, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-3945
  33. Seif, M., Puppo, J., Zlatinov, M., Schaffarzick, D., Martin, A., and Beck, M. J., “Stochastic mechanical modeling of MMOD impact-inspired cylindrical cavities in Duocel foam,” AIAA Aviation Forum, AIAA Paper 2022-3506, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-3506
  34. Zibitsker, A. L., McQuaid, J. A., Brehm, C., and Martin, A., “Study of a Two-Dimensional Shape Change of Blunt-Body Geometries at Hypersonic Conditions Using Fully Coupled Simulation,” AIAA Aviation Forum, AIAA Paper 2022-4006, Chicago, IL, Jun 2022.
    doi: 10.2514/6.2022-4006
  35. Banerjee, A., Martin, A., and Poovathingal, S., “Estimating Effective Radiative Properties and In-Depth Radiative Heating of Porous Ablators,” AIAA SciTech Forum, AIAA Paper 2022-1640, Jan 2022.
    doi: 10.2514/6.2022-1640
  36. Cooper, J. M., Salazar, G., and Martin, A., “Numerical Investigation of Film Coefficient Engineering Methodology for Dissociated, Chemically Reacting Boundary Layers,” AIAA SciTech Forum, AIAA Paper 2022-1907, Jan 2022.
    doi: 10.2514/6.2022-1907
  37. Davuluri, R. S. C., Fu, R., Tagavi, K. A., and Martin, A., “Numerical investigation on the effect of spectral radiative heat transfer within an ablative material,” AIAA SciTech Forum, AIAA Paper 2022-1283, Jan 2022.
    doi: 10.2514/6.2022-1283
  38. Fortner, L., Maddox, J., and Martin, A., “Numerical investigation of an oxyacetylene torch with regards to an ablative material used in re-entry,” AIAA SciTech Forum, AIAA Paper 2022-1498, Jan 2022.
    doi: 10.2514/6.2022-1498
  39. Fu, R., Schmitt, S., and Martin, A., “Thermo-Chemical-Structural Modeling of Carbon Fiber Pitting and Failure Mechanism,” AIAA SciTech Forum, AIAA Paper 2022-1282, Jan 2022.
    doi: 10.2514/6.2022-1282
  40. Schmidt, J. D., Nichols, J. T., Ruffner, M., Nolin, R., Smith, W. T., and Martin, A., “Kentucky Re- Entry Universal Payload System (KRUPS): Design and Testing for Hypersonic Re-Entry Flight,” AIAA SciTech Forum, AIAA Paper 2022-1576, Jan 2022.
    doi: 10.2514/6.2022-1576
  41. Schmitt, S., Fu, R., and Martin, A., “Extension of Kinetic Monte Carlo Simulation Framework to Multilayer Graphene and Graphite Oxidation,” AIAA SciTech Forum, AIAA Paper 2022-1284, Jan 2022.
    doi: 10.2514/6.2022-1284
  42. Schmitt, S. and Martin, A., “Kinetic Monte Carlo Simulations of Nitrogen-Carbon Gas-Surface Reaction at High Temperatures,” AIAA SciTech Forum, AIAA Paper 10.2514/6.2022-0113, Jan 2022.
    doi: 10.2514/6.2022-0113
  43. Seif, M., Puppo, J., Zlatinov, M., Schaffarzick, D., Martin, A., and Beck, M., “Stochastic mechanical modeling of Duocel foam from micro- to macro- length scales,” AIAA SciTech Forum, AIAA Paper 2022-0627, Jan 2022.
    doi: 10.2514/6.2022-0627
  44. Zibitsker, A., McQuaid, J., Brehm, C., and Martin, A., “Development and Verification of a Mesh Deformation Scheme for a Three Dimensional Ablative Material Solver,” AIAA SciTech Forum, AIAA Paper 2022-1285, Jan 2022.
    doi: 10.2514/6.2022-1285
  45. Zibitsker, A., McQuaid, J., Martin, A., and Brehm, C., “Fully-Coupled Simulation of Low Temperature Ablator and Hypersonic Flow Solver.” AIAA SciTech Forum, AIAA Paper 2022-0676, Jan 2022.
    doi: 10.2514/6.2022-0676
  46. Cooper, J. M. and Martin, A., “A Novel Engineering Methodology for Decoupled Aerothermal Analysis of Hypersonic Atmospheric Entry,” AIAA Aviation, AIAA Paper 2021-3147, Aug 2021.
    doi: 10.2514/6.2021-3147.
  47. Davuluri, R., Fu, R., Tagavi, K. A., and Martin, A., “Fully coupled internal radiative heat transfer for the 3D material response of heat shield,” AIAA Aviation, AIAA Paper 2021-3131, Aug 2021.
    doi: 10.2514/6.2021-3131.
  48. Fu, R. and Martin, A., “Hinge Method For CFD and Fluid-Ablation Interaction Modeling,” AIAA Aviation, AIAA Paper 2021-3132, Aug 2021.
    doi: 10.2514/6.2021-3132.
  49. McQuaid, J. A., Zibitsker, A., Martin, A., and Brehm, C., “Heat Flux Predictions for High Speed Flows with an Immersed Boundary Method,” AIAA Aviation, AIAA Paper 2021-3145, Virtual Event, August 2021.
    doi: 10.2514/6.2021-3145.
  50. Schmidt, J., Nichols, J. T., Ruffner, M., Nolin, R., Smith, W., and Martin, A., “Kentucky Re-Entry Universal Payload System (KRUPS): Design and Testing for Orbital Flight,” AIAA Aviation, AIAA Paper 2021-3129, Virtual Event, Aug 2021.
    doi: 10.2514/6.2021-3129.
  51. Stoffel, T., Barrios-Lobelle, A., Schmidt, J., Martin, A., and Poovathingal, S., “Computational Fluid Dynamics Analysis of the Orbital Flight of the Kentucky Re-Entry Universal Payload System (KRUPS),” AIAA Aviation, AIAA Paper 2021-3148, Virtual Event, Aug 2021.
    doi: 10.2514/6.2021-3148.
  52. Barrios-Lobelle, A., Fu, R., Poovathingal, S. J., and Martin, A., “Surface oxidation of carbon/carbon composites in hypersonic environments,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1173, Virtual Event, 2021.
    doi: 10.2514/6.2021-1173.
  53. Davuluri, R. S. C., Price, K. J., Bailey, S. C. C., Tagavi, K. A., and Martin, A., “Nu- merical reconstruction of spalled particle trajectories in an arc-jet environment,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1172, Virtual Event, 2021.
    doi: 10.2514/6.2021-1172.
  54. Fu, R., McDaniel, S. M., Beck, M. J., and Martin, A., “Crack modeling in charring ablation materials,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1050, Virtual Event, 2021.
    doi: 10.2514/6.2021-1050.
  55. Ho, M. F., Seif, M. N., McDaniel, S. M., Leclaire, S., Tr ́epanier, J.-Y., Reggio, M., Beck, M. J., and Martin, A., “Fluid behavior in stochastic porous structures,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1443, Virtual Event, 2021.
    doi: 10.2514/6.2021-1443.
  56. McDaniel, S. M., Seif, M. N., Fu, R., Beck, M. J., and Martin, A., “Development of stochastic model for fibrous ablators,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1473, Virtual Event, 2021.
    doi: 10.2514/6.2021-1473.
  57. McQuaid, J., Zibitsker, A., Saikia, B., Martin, A., and Brehm, C., “An immersed boundary method for high-enthalpy flows with material response,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-0926, Virtual Event, 2021.
    doi: 10.2514/6.2021-0926.
  58. Saikia, B., Hasnine, S. M. A. A., Duen ̃as, L., and Brehm, C., “On the energy transfer mechanisms for the supersonic mode.,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1517, Virtual Event, 2021.
    doi: 10.2514/6.2021-1517.
  59. Seif, M. N., McDaniel, S. M., Beck, M. J., and Martin, A., “Stochastic modeling of elastic behavior of fibrous ablators,” in 59th AIAA Aerospace Sciences Meeting, AIAA Series 2021-1585, Virtual Event, 2021.
    doi: 10.2514/6.2021-1585.
  60. Duzel, U. and Martin, A., “Modeling high velocity flow through porous media,” in 58th AIAA Aerospace Sciences Meeting, AIAA Paper 2020-0486, Orlando, FL, 2020.
    doi: 10.2514/6.2020-0486.
  61. Fu, R. and Martin, A., “Hinge method for immersed boundary problems and micro- scale carbon fiber material response,” in 58th AIAA Aerospace Sciences Meeting, AIAA Paper 2020-0482, Orlando, FL, 2020.
    doi: 10.2514/6.2020-0482.
  62. Fu, R., McDaniel, S. M., Beck, M. J., and Martin, A., “Numerical study of material uncertainties in thermal and structural responses in charring ablation,” in 58th AIAA Aerospace Sciences Meeting, AIAA Paper 2020-0256, Orlando, FL, 2020.
    doi: 10.2514/6.2020-0256.
  63. Fu, R., Ramjatan, S., Kroells, M., Schwartzentruber, T. E., and Martin, A., “Micro- scale thermal-structural modeling for carbon fibers,” in 49th Thermophysics Conference, AIAA Paper 2020-3273, Virtual Event, 2020.
    doi: 10.2514/6.2020-3273.
  64. Martin, A. and Panesi, M., “Radiative transmission and absorption within the thermal protection system of hypersonic vehicle,” in 49th Thermophysics Conference, AIAA Paper 2020-3276, Virtual Event, 2020.
    doi: 10.2514/6.2020-3276.
  65. Price, K. J., Hardy, J. M., Borchetta, C. G., Bailey, S. C. C., Panerai, F., and Mar- tin, A., “Spallation particle size analysis resulting from arc-jet experiments,” in 58th AIAA Aerospace Sciences Meeting, AIAA Paper 2020-1707, Orlando, FL, 2020.
    doi: 10.2514/6.2020-1707.
  66. Price, K. J., Bailey, S. C. C., Panerai, F., Hardy, J. M., Borchetta, C. G., and Mar- tin, A., “Analysis of spallation products using arc-jet experiments,” in 49th Thermo- physics Conference, AIAA Paper 2020-3279, Virtual Event, 2020.
    doi: 10.2514/6.2020-3279.
  67. Barrow, C. T., Maddox, J. F., and Martin, A., “Semi-empirical method for measuring thermal conductivity of fibrous insulation materials,” in 48th AIAA Thermophysics Conference, AIAA Paper 2019-3472, Dallas, TX, 2019.
    doi: 10.2514/6.2019-3472.
  68. Fu, R., Rogers, J., McDaniel, S. M., Wenk, J. F., and Martin, A., “Numerical investigation of nonlinear structural responses in ablation problem,” in 48th AIAA Thermo- physics Conference, Dallas, TX, 2019.
    doi: 10.2514/6.2019-3131.
  69. Fu, R., Setters, C., Rogers, J., Weng, H., and Martin, A., “Sensitivity analysis in material response for ablation problem,” in 48th AIAA Thermophysics Conference, AIAA Paper 2019-2879, Dallas, TX, 2019.
    doi: 10.2514/6.2019-2879.
  70. Cooper, J. M., Schroeder, O. M., Weng, H., and Martin, A., “Implementation and verification of a surface recession module in a finite volume ablation solver,” 12th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 2018- 3272, Atlanta, GA, 2018.
    doi: 10.2514/6.2018-3272.
  71. Sparks, J. D., Myers, G. I., Whitmer, E. C., Nichols, J. T., Dietz, C. J., Khouri, N., Smith, S. W., and Martin, A., “Overview of the second test-flight of the Kentucky re-entry universal payload system (Krups),” 12th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 2018-3589, Atlanta, GA, 2018.
    doi: 10.2514/6.2018-3589.
  72. Duzel, U., Schroeder, O. M., and Martin, A., “Computational prediction of NASA langley hymets arc jet flow with kats,” 56th AIAA Aerospace Sciences Meeting, AIAA 2018-1719, Kissimmee, FL, January 2018.
    doi: 10.2514/6.2018-1719
  73. Sparks, J. D., Whitmer, E. C., Myers, G. I., Montague, C. C., Dietz, C. J., Khouri, N., Nichols, J. T., Smith, S. W., and Martin, A., “Overview of the first test-flight of the Kentucky re-entry universal payload system (krups),” 56th AIAA Aerospace Sciences Meeting, AIAA Paper 2018-1720, Kissimmee, FL, January 2018.
    doi: 10.2514/6.2018-1720
  74. Irvan, M. L., Maddox, J. F., Keen, C. B. A., and Martin, A., “Physics-Based Modeling of Fibrous High Porosity Insulation Materials Using Comparative Cut-Bar Experimentation,” 47th AIAA Thermophysics Conference, AIAA Paper 2017-3887, Denver, CO, June 2017.
    doi: 10.2514/6.2017-3887
  75. Weng, H. and Martin, A., “Development of a Universal Solver and Its Application to Ablation Problems,” 47th AIAA Thermophysics Conference, AIAA Paper 2017-3355, Denver, CO, June 2017.
    doi: 10.2514/6.2017-3355
  76. Omidy, A. D., Cooper, J. M., Fu, R., Weng, H., and Martin, A., “Development Of An Open-Source Avcoat Material Database, VISTA,” 47th AIAA Thermophysics Conference, AIAA Paper 2017-3356, Denver, CO, June 2017.
    doi: 10.2514/6.2017-3356
  77. Omidy, A. D., Weng, H., Martin, A., and Gran ̃a-Otero, J. C., “Modeling Gasification of Carbon Fiber Preform in Oxygen-Rich Environments,” 47th AIAA Thermophysics Conference, AIAA Paper 2017-3686, Denver, CO, June 2017.
    doi: 10.2514/6.2017-3686
  78. Schulz, J. C., Stern, E. C., Muppidi, S., Palmer, G. E., Schroeder, O., and Martin, A., “Development of a three-dimensional, unstructured material response design tool,” 55th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2017-0667, Grapevine, TX, Jan 2017.
    doi: 10.2514/6.2017-0667
  79. Fu, R., Weng, H., Wenk, J. F., and Martin, A., “Development of a coupled elastic solver for ablation problems,” in 55th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2017-0439, Grapevine, TX, Jan. 2017.
    doi: 10.2514/6.2017-0439
  80. Fu, R., Weng, H., Wenk, J. F., and Martin, A., “Application of a new thermo-mechanical coupling solver for ablation,” 46th AIAA Thermophysics Conference, AIAA Paper 2016-4432, Washington, D.C., 2016.
    doi: 10.2514/6.2016-4432
  81. Winter, M., Butler, B. D., Diao, Z., Panerai, F., Martin, A., Bailey, S. C., Danehy, P. M., and Splinter, S., “Characterization of Ablation Product Radiation Signatures of PICA and FiberForm,” 46th AIAA Thermophysics Conference, AIAA Paper 2016-3233, Washington, D.C., 2016.
    doi: 10.2514/6.2016-3233
  82. Cooper, J. M., Stieha, J. K., Fowler, A. M., Wright, N. A., and Martin, A., “Kentucky Re-entry Universal Payload System,” 54th AIAA Aerospace Sciences Meeting, AIAA Paper 2016-2192, San Diego, CA, 2016.
    doi: 10.2514/6.2016-2192
  83. Butler, B. D., Winter, M., Panerai, F., Martin, A., Bailey, S. C., Stackpoole, M., Danehy, P., and Splinter, S., “Characterization of candidate materials for remote recession measurements of ablative heat shield materials,” 54th AIAA Aerospace Sciences Meeting, AIAA Paper 2016-1516, San Diego, CA, 2016.
    doi: 10.2514/6.2016-1516
  84. Davuluri, R. S. C., Zhang, H., and Martin, A., “Effects of spalled particles thermal degradation on a hypersonic flow field environment,” 54th AIAA Aerospace Sciences Meeting, AIAA Paper 2016-0248, San Diego, CA, 2016.
    doi: 10.2514/6.2016-0248
  85. Li, Z., Zhang, H., Hoagg, J. B., Bailey, S. C. C., and Martin, A., “Turbulence simulation using direct gradient adaptive k-w model,” 54th AIAA Aerospace Sciences Meeting, AIAA Paper 2016-0587, San Diego, CA, 2016.
    doi: 10.2514/6.2016-0587
  86. Borchetta, C. G., Martin, A., and Bailey, S. C. C., “Near-surface flow structure over a dimpled surface with blowing,” 68th Annual Meeting of the APS Division of Fluid Dynamics, Vol. 60, Bulletin of the American Physical Society, Boston, MA, November 2015,
    Abstract ID: BAPS.2015.DFD.G21.2.
  87. Martin, A., Bailey, S. C. C., Panerai, F., Davuluri, R. S. C., Vazsonyi, A. R., Zhang, H., Lippay, Z. S., Mansour, N. N., Inman, J. A., Bathel, B. F., Splinter, S. C., and Danehy, P. M., “Preliminary numerical and experimental analysis of the spallation phenomenon,” 8th European Symposium on Aerothermodynamics for Space Vehicles, Paper No. 88621, Lisbon, Portugal, 2015.
    doi: 10.13140/RG.2.1.1612.4328
  88. Panerai, F., Ferguson, J. C., Lachaud, J. R., Martin, A., Gasch, M. J., and Mansour, N. N., “Analysis of fibrous felts for flexible ablators using synchrotron hard X-ray micro-tomography,” 8th European Symposium on Aerothermodynamics for Space Vehicles, Paper No. 89747, Lisbon, Portugal, 2015.
    doi: 10.13140/RG.2.1.2661.0084
  89. Smith, D. L., Omidy, A. D., Weng, H., White, T. R., and Martin, A., “Effects of water presence on low-temperature phenomenon in PICA,” 45th AIAA Thermophysics Conference, AIAA Paper 2015-2505, Dallas, TX, 2015.
    doi: 10.2514/6.2015-2505
  90. Smith, D. L., White, T. R., and Martin, A., “Comparisons of PICA in-depth material performance and ablator response modeling from MEDLI arc jet tests,” 45th AIAA Thermophysics Conference, AIAA Paper 2015-2664, Dallas, TX, 2015.
    doi: 10.2514/6.2015-2664
  91. Weng, H. and Martin, A., “Numerical Investigation of Geometric Effects of Stardust Return Capsule Heat Shield,” 53rd AIAA Aerospace Sciences Meeting, Kissimmee, FL, 2015.
    doi: 10.2514/6.2015-0211
  92. Helvey, J. P., Borchetta, C. G., Miller, M. A., Martin, A., and Bailey, S. C. C., “Investigation of Wall Shear Stress Behavior for Rough Surfaces with Blowing,” 67th Annual Meeting of the APS Division of Fluid Dynamics, Vol. 59, No. 18, Bulletin of the American Physical Society, San Francisco, CA, 2014,
    Abstract ID: BAPS.2014.DFD.H26.8.
  93. Weng, H. and Martin, A., “Numerical Investigation of Pyrolysis Gas Blowing Pattern and Thermal Response using Orthotropic Charring Ablative Material,” 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 2014-2121, Atlanta, GA, 2014.
    doi: 10.2514/6.2014-2121
  94. Davuluri, R. and Martin, A., “Numerical study of spallation phenomenon in an arc-jet environment,” 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 2014-2249, Atlanta, GA, 2014.
    doi: 10.2514/6.2014-2249
  95. Panerai, F., Lachaud, J., Mansour, N., and Martin, A., “Numerical and experimental study of carbon fiber oxidation,” 52nd AIAA Aerospace Sciences Meeting, AIAA Paper 2014-1208, National Harbor, MD, 2014.
    doi: 10.2514/6.2014-1208
  96. Zhang, H.-B., Weng, H., and Martin, A., “Simulation of Flow-tube Oxidation on the Carbon Preform of PICA,” 52nd AIAA Aerospace Sciences Meeting, AIAA Paper 2014- 1209, National Harbor, MD, 2014.
    doi: 10.2514/6.2014-1209
  97. Miller, M. A., Martin, A., and Bailey, S. C. C., “Experimental Investigation of Blowing Effects on Turbulent Flow Over a Rough Surface,” 8th International Symposium on Turbulence and Shear Flow Phenomena, Poitiers, France, 2013. url: http://www.tsfp-conference.org/images/stories/proceedings/
    2013/v3/tsfc.pdf
  98. Alkandry, H., Boyd, I. D., and Martin, A., “Coupled Flow Field Simulations of Charring Ablators with Nonequilibrium Surface Chemistry,” 44th AIAA Thermophysics Conference, AIAA Paper 2013-2634, San Diego, CA, 2013.
    doi: 10.2514/6.2013-2634
  99. Mansour, N. N., Panerai, F., Martin, A., Parkinson, D. Y., MacDowell, A., Haboub, A., Sandstrom, T. A., Fast, T., Vignoles, G. L., and Lachaud, J., “A New Approach To Light-Weight Ablators Analysis: From Micro-Tomography Measurements to Statical Analysis and Modeling,” 44th AIAA Thermophysics Conference, AIAA Paper 2013-2768, San Diego, CA, 2013.
    doi: 10.2514/6.2013-2768
  100. Panerai, F., Martin, A., Mansour, N. N., Sepka, S. A., and Lachaud, J., “Flow-tube Oxidation Experiments on the Carbon Preform of PICA,” 44th AIAA Thermophysics Conference, AIAA Paper 2013-2769, San Diego, CA, 2013.
    doi: 10.2514/6.2013-2769
  101. Martin, A., “Volume averaged modeling of the oxidation of porous carbon fiber material,” 44th AIAA Thermophysics Conference, AIAA Paper 2013-2636, San Diego, CA, 2013.
    doi: 10.2514/6.2013-2636
  102. Weng, H. and Martin, A., “Multi-dimensional modeling pyrolysis gas flow inside charring ablators,” 44th AIAA Thermophysics Conference, AIAA Paper 2013-2635, San Diego, CA, 2013.
    doi: 10.2514/6.2013-2635
  103. Miller, M. A., Bailey, S. C. C., and Martin, A., “Investigation of Turbulent Structure Modification by Momentum Injection Into Turbulent Flow Over a Rough Surface,” 51st AIAA Aerospace Sciences Meeting, AIAA Paper 2013-534, Grapevine, TX, 2013.
    doi: 10.2514/6.2013-534
  104. Martin, A., “Modeling of chemical non-equilibrium effects in a charring ablator,” 51st AIAA Aerospace Sciences Meeting, AIAA Paper 2013-0301, Grapevine, TX, 2013.
    doi: 10.2514/6.2013-301
  105. Alkandry, H., Boyd, I. D., and Martin, A., “Comparison of Models for Mixture Transport Properties for Numerical Simulations of Ablative Heat-Shields,” 51st AIAA Aerospace Sciences Meeting, AIAA Paper 2013-0303, Grapevine, TX, 2013.
    doi: 10.2514/6.2013-303
  106. Miller, M. A., Martin, A., and Bailey, S. C. C., “Investigation of Turbulence Modification by Momentum Injection Into Turbulent Flow Over a Rough Surface,” 65th Annual Meeting of the APS Division of Fluid Dynamics, Vol. 57, Bulletin of the American Physical Society, San Diego, USA, 2012,
    Abstract ID: BAPS.2012.DFD.L23.3.
  107. Weng, H., Martin, A., Khan, O. U., and Huai-Bao, Z., “Multi-dimensional modeling of charring ablators,” 43rd AIAA Thermophysics Conference, AIAA Paper 2012-2748, New Orleans, LA, June 25-28 2012.
    doi: 10.2514/6.2012-2748
  108. Martin, A. and Boyd, I. D., “Modeling of heat transfer attenuation by ablative gasses during Stardust re-entry,” 50th AIAA Aerospace Sciences Meeting, AIAA Paper 2012- 0814, Nashville, TN, 2012.
    doi: 10.2514/6.2012-814
  109. Khan, O. U. and Martin, A., “Effect of Applied Magnetic Field on Shock Boundary Layer Interaction,” 50th AIAA Aerospace Sciences Meeting, AIAA Paper 2012-0355, Nashville, TN, 2012.
    doi: 10.2514/6.2012-355
  110. Farbar, E. D., Boyd, I. D., and Martin, A., “Modeling Ablation of Charring Heat Shield Materials For Non-Continuum Hypersonic Flow,” 50th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2012-0532, Nashville, TN, 2012.
    doi: 10.2514/6.2012-532
  111. Martin, A., Farbar, E. D., and Boyd, I. D., “Numerical modeling of the CN spectral emission of the Stardust re-entry vehicle,” 42nd AIAA Thermophysics Conference, AIAA Paper 2011-3125, Honolulu, HI, 2011.
    doi: 10.2514/6.2011-3125
  112. Farbar, E. D., Boyd, I. D., Kim, M., and Martin, A., “Investigation of the Effects of Electronic-Electron Translational Nonequilibrium on Numerical Predictions of Hypersonic Flowfields,” 42nd AIAA Thermophysics Conference, AIAA Paper 2011-3136, Honolulu, HI, 2011.
    doi: 10.2514/6.2011-3136
  113. Martin, A. and Boyd, I. D., “CFD Implementation of a novel carbon-phenolic-in-air chemistry model for atmospheric re-entry,” 49th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2011-143, Orlando, FL, 2011.
    doi: 10.2514/6.2011-143
  114. Martin, A. and Boyd, I. D., “Mesh tailoring for strongly coupled computation of ablative material in nonequilibrium hypersonic flow,” 10th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 2010-5062, Chicago, IL, 2010.
    doi: 10.2514/6.2010-5062
  115. Martin, A. and Boyd, I. D., “Assessment of carbon-phenolic-in-air chemistry models for atmospheric re-entry,” 10th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 2010-4656, Chicago, IL, 2010.
    doi: 10.2514/6.2010-4656
  116. Martin, A., Boyd, I. D., Cozmuta, I., and Wright, M. J., “Chemistry model for ablating carbon-phenolic material during atmospheric re-entry,” 48th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2010-1175, Orlando, FL, 2010.
    doi: 10.2514/6.2010-1175
  117. Martin, A. and Boyd, I. D., “Strongly coupled computation of material response and nonequilibrium flow for hypersonic ablation,” 41th AIAA Thermophysics Conference, AIAA Paper 2009-3597, San Antonio, TX, 2009.
    doi: 10.2514/6.2009-3597
  118. Martin, A. and Boyd, I. D., “Implicit implementation of material response and moving meshes for hypersonic re-entry ablation,” 47th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 2009-0670, Orlando, FL, 2009.
    doi: 10.2514/6.2009-670
  119. Martin, A. and Boyd, I. D., “Simulation of pyrolysis gas within a thermal protection system,” 40th AIAA Thermophysics Conference, AIAA Paper 2008-3805, Seattle, WA, 2008.
    doi: 10.2514/6.2008-3805
  120. Martin, A., Reggio, M., Trépanier, J.-Y., and Guo, X., “Transient ablation regime in circuit-breakers,” XVI International Conference on Gas Discharges and their Applications, Xi’an Jiaotong University, Xi’an, People’s Republic of China, 2006.
    doi: 10.13140/2.1.2298.4002
  121. Martin, A., Reggio, M., and Trépanier, J.-Y., “Simulation of multi-species gas flows in circuit-breakers with arc-wall interactions,” XV International Conference on Gas Discharges and their Applications, Universite Paul Sabatier, Toulouse, France, 2004, pp. 33–36.
    doi: 10.13140/2.1.3346.9769
  122. Martin, A., Reggio, M., and Trépanier, J.-Y., “Solution of Multi-species Real Gas Flows with Electric Arc and Wall Ablation,” 12th Annual Conference of the CFD Society of Canada, National Research Council Canada, Ottawa, Canada, 2004.
    doi: 10.13140/2.1.4002.3369
  123. Martin, A., Reggio, M., and Trépanier, J.-Y., “Simulation of Inviscid Multi-Species Plasma Flow,” Computational Technologies for Fluid/Thermal/Structural/Chemical Systems with Industrial Applications, Volume 1, Pressure Vessel and Piping Divison, ASME, 2002, pp. 147–154.
    doi: 10.1115/PVP2002-1546
  124. Martin, A., Reggio, M., and Trépanier, J.-Y., “Simulation of inviscid multi-species plasma flow,” 9th Annual Conference of the CFD Society of Canada, Vol. 1, University of Waterloo, Waterloo, Canada, pp. 459–464, 2001.
    doi: 10.13140/2.1.4526.6248
  125. Martin, A., Reggio, M., and Trépanier, J.-Y., “NEPTUNE: Un logiciel pour les écoulements de rivière,” 8th Annual Conference of the CFD Society of Canada, Vol. 1, CERCA, Montréal, Canada, pp. 199–205 2000.
    doi: 10.13140/2.1.3478.0483

Dissertations

  1. Sinha, S., Precision Meteorological Prediction Employing A Data-Driven, Adaptive, Real-Time (DART) Approach, Ph.D. Dissertation, University of Kentucky, Lexington, KY, December 2023.
    doi: 10.13023/etd.2023.492
  2. Davuluri, R. S. C., Impact of spallation and internal radiation on fibrous ablative materials, Ph.D. Dissertation, University of Kentucky, Lexington, KY, July 2023.
    doi: 10.13023/etd.2023.286
  3. Seif, M. N., Application of multi-scale computational techniques to complex materials systems, Ph.D. Dissertation, University of Kentucky, Lexington, KY, January 2023.
    doi: 10.13023/etd.2023.011
  4. Cooper, J. M., A Decoupled Engineering Methodology for Accurate Prediction of Ablative Surface Boundary Conditions in Thermal Protection Systems, Ph.D. Dissertation, University of Kentucky, Lexington, KY, April 2022.
    doi: 10.13023/etd.2022.131
  5. Duzel, U., Development of Universal Solver for High Enthalpy Flows Through Ablative Materials, Ph.D. Dissertations, University of Kentucky, Lexington, KY, December 2020.
    doi: 10.13023/etd.2020.417
  6. Omidy, A. D., Multiphase Interaction in Low-Density Volumetric Charring Ablators, Ph.D. Dissertations,
    University of Kentucky, Lexington, KY, November 2018.
    doi: 10.13023/etd.2018.476
  7. Fu, R., Thermo-mechanical coupling for ablation, Ph.D. Dissertations, University of Kentucky, Lexington, KY, October 2017
    doi: 10.13023/ETD.2018.113
  8. Li, Z., Data-Driven Adaptive Reynolds-Averaged Navier-Stokes k - ω Models for Turbulent Flow-Field Simulations, Ph.D. Dissertations, University of Kentucky, Lexington, KY, July 2017.
    doi: 10.13023/ETD.2017.280
  9. Zhang, H., Coupling of high-temperature gas and porous media flow, Ph.D. Dissertations, University of Kentucky, Lexington, KY, July 2015.
    doi: 10.13023/etd.2015.002
  10. Weng, H., Multidimensional modeling of pyrolysis gas transport inside orthotropic charring ablators, Ph.D. Dissertations, University of Kentucky, Lexington, KY, December 2014.
    doi: 10.13023/etd.2014.002

Thesis

  1. Meade, C., A computational fluid dynamic analysis of oxyacetylene combustion flow for use in material response boundary conditions, M.Sc. Thesis, University of Kentucky, Lexington, KY, December 2023.
    doi: 10.13023/etd.2023.491
  2. Schmidt, J. D., Kentucky Re-Entry Universal Payload System (KRUPS): Hypersonic Re-Entry Flight, M.Sc. Thesis, University of Kentucky, Lexington, KY, August 2022.
    doi: 10.13023/etd.2022.0XX
  3. Rogers, J. P., Structural Optimization of Space Transit Vehicle Concept, Hercules, M.Sc. Thesis, University of Kentucky, Lexington, KY, April 2022.
    doi: 10.13023/etd.2022.049
  4. Khaleel, M., Radiative Conductivity Estimation Using Direct Approach For Fibrous Materials, M.Sc. Thesis, University of Kentucky, Lexington, KY, February 2022.
    doi: 10.13023/etd.2022.187
  5. Fortner, L. A., Numerical Investigation of an Oxyacetylene Torch With Regards to an Ablative Material, M.Sc. Thesis, University of Kentucky, Lexington, KY, January 2022.
    doi: 10.13023/etd.2022.026
  6. Setters, C. E., Modeling Thin Layers in Material Response Solvers, M.Sc. Thesis, University of Kentucky, Lexington, KY, October 2021.
    doi: 10.13023/etd.2021.404
  7. Zheng, M., Evaluation of Radiative Conductivity inside a Porous Media with the Effect of Participating Medium Based on Microscale Imaging, Master’s thesis, University of Kentucky, Lexington, KY, June 2021
    doi: 10.13023/etd.2021.299.
  8. Nichols, J. T., The Kentucky Re-Entry Universal Payload System (KRUPS): Orbital Flight, M.Sc. Thesis, University of Kentucky, Lexington, KY, December 2020.
    doi: 10.13023/etd.2021.001
  9. Meek, C. B., Design Process for Rigid Tank Containment and Manipulation of Liquids in Microgravity, M.Sc. Thesis, University of Kentucky, Lexington, KY, August 2019.
    doi: 10.13023/etd.2019.416
  10. Sparks, J. D., The Kentucky Re-entry Universal Payload System (KRUPS): Sub-orbital Flights, M.Sc. Thesis, University of Kentucky, Lexington, KY, August 2018.
    doi: 10.13023/etd.2018.388
  11. Schroeder, O. M., Verification and Validation Studies for the KATS Aerothermodynamics and Material Response Solver, M.Sc. Thesis, University of Kentucky, Lexington, KY, August 2018.g
    doi: 10.13023/etd.2018.355
  12. Smith, D. L., Comparisons of ablator experimental performance to response modeling and effects of water phase transition in porous TPS materials, M.Sc. Thesis, University of Kentucky, Lexington, KY, December 2016.
    doi: 10.13023/ETD.2016.501
  13. Nouri, N., Radiative conductivity analysis of low-density fibrous materials, M.Sc. Thesis, University of Kentucky, Lexington, KY, July 2015.
    doi: 10.13023/etd.2015.003
  14. Davuluri, R. S. C., Modeling of Spallation Phenomenon in an arc-jet environment, M.Sc. Thesis, University of Kentucky, Lexington, KY, May 2015.
    doi: 10.13023/etd.2015.001

Reports

  1. Omidy, A. D., Panerai, F., Lachaud, J. R., Mansour, N. N., Cozmuta, I., and Martin, A., “Code-to-Code Comparison, and Material Response Modeling of Stardust and MSL using PATO and FIAT,” NASA Ames Research Center, Moffett Field, CA, Contractor Report NASA/CR-2015-218960, 2015.
    HDL: 2060/201600069632060
  2. Martin, A., “Modeling of pyrolysis gas in charring ablators,” STO/VKI Lecture Series on Radiation and gas-surface interaction phenomena in high-speed re-entry, STO-EN- AVT-218, Paper 3, 2014.
    URL: http://www.cso.nato.int/Pubs/rdp.asp?RDP=STO-EN-AVT-218

Other

  1. Burt, J. M. and Martin, A., “Thermophysics advances in many area,” Aerospace America, Vol. 54, No. 11, December 2016, pp. 24.
  2. Brandis, A. M., Martin, A., Schwartzentruber, T. E., Martin, M. J., Feldman, J., and Prabhu, D. K., “Preparing thermophysics for new missions,” Aerospace America, vol. 53, no. 11, p. 24, 2015.